Products

  • Root Destroyer, 2 lb. Bottle
    • Root Destroyer, 2 lb. Bottle
    • Root Destroyer, 2 lb. Bottle
    • RectorSeal Root Destroyer is formulated to kill growth of roots entering sewer systems through pipe joints. When applied as directed, only roots in contact with pipes absorb it. It dissolves blockages, making roots wither & allowing sewage to flow.
    • Read more
  • RSH-120 Surge Protector
    • RSH-120 Surge Protector
    • RSH-120 Surge Protector
    • The RSH-120 is a surge protector for the entire home, and is meant to be installed at the breaker panel. The RSH-120 uses Gas Discharge Tube Technology along with Thermally-Fused Metal Oxide Varistors for ultimate protection.
    • Read more
  • Qmax
    • Qmax
    • Qmax
    • High capacity slot drainage system ACO Qmax has been developed to satisfy the demand for a versatile, high capacity slot drainage system for a wide range of applications involving small to large catchment areas to any load class.
    • Read more
  • PowerDrain – S100K/S200K/S300K
    • PowerDrain – S100K/S200K/S300K
    • PowerDrain – S100K/S200K/S300K
    • Heavy duty ductile iron edged, multiple lock, modular trench drain systems An extra heavy duty modular drainage system, in a choice of 3 internal widths - 100mm, 200mm & 300mm. Ideal for industrial and heavy commercial applications.
    • Read more
  • KlassikDrain – K100/K200/K300
    • KlassikDrain – K100/K200/K300
    • KlassikDrain – K100/K200/K300
    • General purpose steel edge, modular trench drain system A general purpose modular drainage system, in a choice of 3 internal widths - 100mm, 200mm & 300mm. Ideal for pedestrian, commercial and light industrial applications.
    • Read more
  • Flame Seal 60-60A Thermal Barrier
    • Flame Seal 60-60A Thermal Barrier
    • Flame Seal 60-60A Thermal Barrier
    • Flame Seal 60-60A has met the criteria for use as a 15-minute thermal barrier on Spray Polyurethane Foam (SPF). No. 60-60A is a low VOC, water-based intumescent coating that dries to a flat finish. 60-60A was subjected to flammability testing per NFPA 286 and successfully met the criteria listed in the 2006, 2009, 2012, and 2015 International Building Code (IBC)…
    • Read more
  • Flame Seal FX950
    • Flame Seal FX950
    • Flame Seal FX950
    • Flame Seal FX950 is a water-based Intumescent paint that can be applied to most substrates including, lumber, plywood, OSB, and Gypsum. FX950 is fully tested and has a rating ranging from Class A to 2 hours to meet building codes domestically, internationally, and for the Wildfire Urban Interface. When Flame Seal FX950 is exposed to fire or extreme heat, a…
    • Read more
  • THERMAFIBER® SAFING
    • THERMAFIBER® SAFING
    • ,
    • THERMAFIBER® SAFING
    • WHY CHOOSE MINERAL WOOL INSULATION? Thermafiber® Safing mineral wool insulation products are designed to provide fire protection in perimeter fire containment systems, floor and wall penetrations, construction joints, and other firestopping applications.
    • Read more
  • Thermafiber® FireSpan® FF 40 & FF 90
  • ACO modular slot trench drain
    • ACO modular slot trench drain
    • ACO modular slot trench drain
    • Modular slot trench drain with standardized 20 mm width provides a versatile system with off-the-shelf availability. Accessories such as corner units and a choice of grate make this system perfect for a wide range of applications. Certified to EN 1433, CE marked.
    • Read more
  • ACO modular trench drain
    • ACO modular trench drain
    • ACO modular trench drain
    • Modular trench drain range with standardized 125 and 200 mm widths provides a versatile system with off-the-shelf availability. Accessories such as corner units and a choice of grating make this system perfect for a wide range of applications. Certified to EN 1433, CE marked.
    • Read more
  • ACO hygienic trough
    • ACO hygienic trough
    • ACO hygienic trough
    • The ACO hygienic trough range incorporates hygienic principles to ensure the optimum hygienic performance. The hygienic box channel range is ideal for applications where high standards of hygiene are required as they are capable of handling large volumes of fluid. ACO hygienic box channels are certified according to EN 1253.
    • Read more
  • ACO Hygienic floor drain
    • ACO Hygienic floor drain
    • ACO Hygienic floor drain
    • ACO hygienic drainage uses stainless steel floor drains to fulfil the strongest hygienic requirements to prevent bacterial contamination. We apply hygienic design principles reserved for food processing equipment (EHEDG document No. 8, 13 and 44) to the commercial kitchen and restaurant floor drain design and NSF/ANSI 3-A 14159-1-2014.
    • Read more
  • BHFE – Non Pre-compressed EVA Seal
    • BHFE – Non Pre-compressed EVA Seal
    • ,
    • BHFE – Non Pre-compressed EVA Seal
    • JOINT SIZE: 0.5-4″ MOVEMENT: ±25% Expansion/Contraction FEATURES: Water-tight foam seal; ideal for below grade applications; Ethylene Vinyl Acetate (EVA); For secondary waterproofing only; requires additional protection on floor applications; Easy to install; Installs with epoxy, without mechanical fasteners; Available in gray only; Ships in 6′ lengths PERFORMANCE: Sound transmission loss rating as high as 36 STC, 35 OITC per ASTM E90; No-cracking weather resistance…
    • Read more
  • BCSF-SL – Pre-compressed Primary Seal
    • BCSF-SL – Pre-compressed Primary Seal
    • ,
    • BCSF-SL – Pre-compressed Primary Seal
    • JOINT SIZE: 0.5-6″ MOVEMENT: ±50% Expansion/Contraction FEATURES: Traffic-grade; Silicone face (available in gray only); Easy to install; Installs with epoxy, without mechanical fasteners; UV stable, chemically resistant, watertight, mildew resistant, dust-proof, airtight, sound resistant, insulated; Ships in 5′ lengths PERFORMANCE: Meets 21 psi min. tensile strength per ASTM 3574; Flame spread 0 (selfextinguishing) per ASTM E84; Sound transmission loss rating as high as…
    • Read more
  • RPA – Serrated Plate
    • RPA – Serrated Plate
    • ,
    • RPA – Serrated Plate
    •   RELATED: RPAL JOINT SIZE: 1-6″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear varies FEATURES: Easy to install; Surface mount installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD: Pedestrian, Gurney/Bed, X-ray, Floor Sweeper, Passenger…
    • Read more
  • EXF – Tile
    • EXF – Tile
    • ,
    • EXF – Tile
    •   RELATED: EXFL JOINT SIZE: 2-12″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear varies FEATURES: Easy to install; Easy to clean; Flush with tile flooring; Centering bar device holds cover in place throughout movement (EXFL excluded); Designed for heavy loading; Surface mount installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind…
    • Read more
  • EXBF – Smooth
    • EXBF – Smooth
    • ,
    • EXBF – Smooth
    •   RELATED: EXBFL JOINT SIZE: 2-12″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear varies FEATURES: Easy to install; Easy to clean; Centering bar device holds cover in place throughout movement (EXBFL excluded); Designed for heavy loading; Surface mount installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399…
    • Read more
  • BHSF – Hinge Plate
    • BHSF – Hinge Plate
    • ,
    • BHSF – Hinge Plate
    •   RELATED: BHSFL JOINT SIZE: 2-16″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear varies FEATURES: Heavy duty plate; Easy to install; Designed for pedestrian loading; Surface mount installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to…
    • Read more
  • BHS – Hinge
    • BHS – Hinge
    • ,
    • BHS – Hinge
    • RELATED: BHSE, BHSL JOINT SIZE: 2-6″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% Expansion/Contraction; ±50% Lateral Shear; Vertical Shear varies FEATURES: Heavy duty serrated plate; Easy to install; Designed for heavy loading; Surface mount installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD:…
    • Read more
  • BCP – Carpet
    • BCP – Carpet
    • ,
    • BCP – Carpet
    • RELATED: BCPL JOINT SIZE: 1-2″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% Expansion/Contraction FEATURES: Saddle plate cover; Narrow exposed serrated edge; Surface mount installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD: Pedestrian (See Load Data Sheet for details)
    • Read more
  • G – Surface Mount Plate
    • G – Surface Mount Plate
    • ,
    • G – Surface Mount Plate
    • RELATED: GF, GC JOINT SIZE: 1-2″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% Expansion/Contraction; ±50% Lateral Shear FEATURES: Easy to install; Easy to clean; Surface mount installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD: Pedestrian (See Load Data Sheet for details)
    • Read more
  • 1120 (& 1420) – Recessed
    • 1120 (& 1420) – Recessed
    • ,
    • 1120 (& 1420) – Recessed
    • RELATED: 1420 JOINT SIZE: 1-2″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% Expansion/Contraction FEATURES: Designed for minimal “bump” across floor transitions; Vinyl seal in black and gray options; Blockout installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD: Pedestrian (See Load Data Sheet for…
    • Read more
  • 95GFTB – Tile Recessed
    • 95GFTB – Tile Recessed
    • ,
    • 95GFTB – Tile Recessed
    •   RELATED: 95GFVTB JOINT SIZE: 2-12″+ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Dual santoprene seals; Accommodates flooring within recess, narrow exposed sightline; Centering bar device holds cover in place throughout movement (95GFVTB excluded); Blockout installation only; Multiple santoprene color options available (see Color Chart for details); Ships in…
    • Read more
  • 95GFPB – Smooth
    • 95GFPB – Smooth
    • ,
    • 95GFPB – Smooth
    •   RELATED: 95GFVPB JOINT SIZE: 2-12″+ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Dual santoprene seals; Centering bar device holds cover in place throughout movement (95GFVPB excluded); Surface mount installation only; Multiple santoprene color options available (see Color Chart for details); Ships in 10′ lengths PERFORMANCE: Seismic, thermal and…
    • Read more
  • 75FTE – Tile Surface Mount
    • 75FTE – Tile Surface Mount
    • ,
    • 75FTE – Tile Surface Mount
    • RELATED: 75FVTE JOINT SIZE: 1-2″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±25% Expansion/Contraction FEATURES: Flush with tile flooring; Surface mount installation only; Multiple santoprene color options available (see Color Chart for details); Ships in 10′ lengths PERFORMANCE: Thermal movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD: Pedestrian (See Load Data Sheet for details)
    • Read more
  • 75FPE – Smooth Surface Mount
    • 75FPE – Smooth Surface Mount
    • ,
    • 75FPE – Smooth Surface Mount
    • RELATED: 75FVPE JOINT SIZE: 1-2″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±25% Expansion/Contraction FEATURES: Ideal for retrofit applications; Surface mount installation only; Multiple santoprene color options available (see Color Chart for details); Ships in 10′ lengths PERFORMANCE: Thermal movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD: Pedestrian (See Load Data Sheet for details)
    • Read more
  • 75FP – Recessed Mount
    • 75FP – Recessed Mount
    • ,
    • 75FP – Recessed Mount
    • RELATED: 75FVP JOINT SIZE: 1-2″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±25% Expansion/Contraction FEATURES: Narrow exposed sightline; No exposed fasteners; Recessed mount installation only; Multiple santoprene color options available (see Color Chart for details); Ships in 10′ lengths; Available in 0.75,” 1,” 1.5,” and 2″ depths PERFORMANCE: Thermal movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes…
    • Read more
  • 75FCE – Carpet Surface Mount
    • 75FCE – Carpet Surface Mount
    • ,
    • 75FCE – Carpet Surface Mount
    • RELATED: 75FVCE JOINT SIZE: 1-2″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±25% Expansion/Contraction FEATURES: Flanges for carpet; Narrow exposed sightline; No exposed fasteners; Surface mount installation only; Multiple santoprene color options available (see Color Chart for details); Ships in 10′ lengths PERFORMANCE: Thermal movement per ASTM E1399 standard; Meets ADA guidelines for slip resistance; Contributes to LEED® credits LOAD: Pedestrian…
    • Read more
  • XH4FS – Serrated Heavy Duty
    • XH4FS – Serrated Heavy Duty
    • ,
    • XH4FS – Serrated Heavy Duty
    •    RELATED: XH4FVS, SSXH4FS, SSXH4FVS JOINT SIZE: 1-6″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Serrated covers; Designed for heavy loading; Designed for minimal “bump” across floor transitions; Glide plate self-centers during movement; Blockout installation only; Ships in 10′ lengths; Directionally sanded aluminum plate standard, stainless steel option available…
    • Read more
  • 6FTP – Tile Recessed
    • 6FTP – Tile Recessed
    • ,
    • 6FTP – Tile Recessed
    •    RELATED: 6FVTP, SS6FTP, SS6FVTP JOINT SIZE: 1-8″+ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Tile infill; Designed for minimal “bump” across floor transitions; Glide plate self-centers during movement; Blockout installation only; Ships in 10′ lengths; Directionally sanded aluminum plate standard, stainless steel option available (subject to upcharge) PERFORMANCE:…
    • Read more
  • 6FS – Grooved
    • 6FS – Grooved
    • ,
    • 6FS – Grooved
    •    RELATED: 6FVS, SS6FS, SS6FVS JOINT SIZE: 1-8″+ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Exposed grooved covers; Designed for minimal “bump” across floor transitions; Glide plate self-centers during movement; Blockout installation only; Ships in 10′ lengths; Directionally sanded aluminum plate standard, stainless steel option available (subject to upcharge)…
    • Read more
  • 6FP – Smooth
    • 6FP – Smooth
    • ,
    • 6FP – Smooth
    •    RELATED: 6FVC, SS6FC, SS6FVC JOINT SIZE: 1-8″+ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Designed for minimal “bump” across floor transitions; Glide plate self-centers during movement; Blockout installation only; Ships in 10′ lengths; Directionally sanded aluminum plate standard, stainless steel option available (subject to upcharge) PERFORMANCE: Seismic, thermal…
    • Read more
  • 6FC – Carpet Recessed
    • 6FC – Carpet Recessed
    • ,
    • 6FC – Carpet Recessed
    •    RELATED: 6FVC, SS6FC, SS6FVC JOINT SIZE: 1-8″+ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Designed for minimal “bump” across floor transitions; Glide plate self-centers during movement; Blockout installation only; Ships in 10′ lengths; Directionally sanded aluminum plate standard, stainless steel option available (subject to upcharge) PERFORMANCE: Seismic, thermal…
    • Read more
  • 6FA – Abrasive-filled
    • 6FA – Abrasive-filled
    • ,
    • 6FA – Abrasive-filled
    •    RELATED: 6FVA, SS6FA, SS6FVA JOINT SIZE: 1-8″+ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Designed for minimal “bump” across floor transitions; Glide plate self-centers during movement; Proprietary, slip-resistant epoxy abrasive, Multiple abrasive color options available (see Color Chart for details); Blockout installation only; Ships in 10′ lengths; Directionally…
    • Read more
  • PJC (ConVerge™ System) – Pan System
    • PJC (ConVerge™ System) – Pan System
    • ,
    • PJC (ConVerge™ System) – Pan System
    •    RELATED: PJCL JOINT SIZE: 2-24″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Designed for minimal “bump” across floor transitions; Accommodates flooring within recess, narrow exposed sightline; No exposed fasteners; Centering bar device holds cover in place throughout movement (PJCL excluded); Blockout installation only; Ships in 10′ lengths PERFORMANCE:…
    • Read more
  • NBR – Tile Recessed
    • NBR – Tile Recessed
    • ,
    • NBR – Tile Recessed
    •    RELATED: NBRL JOINT SIZE: 1-12″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear varies FEATURES: Designed for no “bump” across floor transitions; Accommodates flooring within recess, narrow exposed sightline; No exposed fasteners; Centering bar device holds cover in place throughout movement; Blockout installation only; Ships in 10′ lengths; 1/8,” 3/16″ and 3/8″ recess depths…
    • Read more
  • NBAF – Smooth
    • NBAF – Smooth
    • ,
    • NBAF – Smooth
    •     RELATED: NBAFL, NBSF, NBSFL JOINT SIZE: 1-12″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% Lateral Shear; Vertical Shear Varies FEATURES: Designed for no “bump” across floor transitions; Centering bar holds cover in place throughout movement; Blockout installation only; Ships in 10′ lengths; Directionally sanded aluminum plate standard, stainless steel option available (subject to upcharge) PERFORMANCE: Seismic, thermal…
    • Read more
  • HDNB – Smooth Heavy Duty
    • HDNB – Smooth Heavy Duty
    • ,
    • HDNB – Smooth Heavy Duty
    • RELATED: HDNBL JOINT SIZE: 2-8″ (Custom larger sizes may be available; contact Balco directly) MOVEMENT: ±50% to ±100% Expansion/Contraction; ±50% to ±100% Lateral Shear; Vertical Shear Varies FEATURES: Designed for heavy loading; Designed for no “bump” across floor transitions; Centering bar device holds cover in place throughout movement; Blockout installation only; Ships in 10′ lengths PERFORMANCE: Seismic, thermal and wind movement per ASTM E1399 standard;…
    • Read more
  • Smoke Curtains
    • Smoke Curtains
    • Smoke Curtains
    • Kent Smoke Curtains tested in accordance to BS EN 12101-1:2006, Kent manufactures CE D120 labelled Smoke Curtains in its technologically advanced set up.
    • Read more
  • Fire curtains
    • Fire curtains
    • Fire curtains
    • Kent Fire curtains are barriers replacing fire doors and fire partitions and provide a safe escape for up to 4 hours to the occupants of a building in event of an fire.
    • Read more
  • Balcony Drain
  • FX-100 FIRE PROTECTIVE COATING “AND” T-50 CURING AGENT
  • FX-100 Fire Retardant Coating
  • FLAME SEAL-TB – THERMAL BARRIER FOAM COATING
  • WOOD SEAL-A
    • WOOD SEAL-A
    • WOOD SEAL-A
    • Flame Seal WOOD SEAL-A™- CLASS A -Fire Retardant Penetrant (Water Based - Non Toxic) Flame Spread= 25, Smoke Generation = 50 Technical Data Sheet : English | Thai
    • Read more
  • FABRIC SEAL Fire Retardant Concentrate
  • LEATHER SEAL
  • RectorSeal No. 5
    • RectorSeal No. 5
    • RectorSeal No. 5
    • RectorSeal® No. 5® pipe thread sealant is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2" and 100 psi(for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use…
    • Read more
  • RectorSeal T Plus 2
    • RectorSeal T Plus 2
    • RectorSeal T Plus 2
    • RectorSeal® T Plus 2® pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. T Plus 2 may be pressurized immediately following application. Conforms to TT-S-1732. Technical Data Sheet :…
    • Read more
  • EP-400 Epoxy Putty
    • EP-400 Epoxy Putty
    • EP-400 Epoxy Putty
    • RectorSeal EP-400 (4 oz.) epoxy putty is a pre-measured knead able reinforced epoxy putty stick that cures "steel-hard" within 15 to 20 minutes of mixing at room temperature (77 degree F). The epoxy is extremely tough and durable with exceptional adhesion to a wide range of surfaces. Technical Data Sheet : English
    • Read more
  • Metacaulk Firestop Pillows
    • Metacaulk Firestop Pillows
    • Metacaulk Firestop Pillows
    • Intumescent Firestop Pillows are designed for use primarily in large openings with cables, cable trays, blank openings or multiple penetrating items. In the event of a fire, RectorSeal® Firestop Pillows will prevent the spread of flames and hot gases through the openings. Technical Data Sheet : English
    • Read more
  • Metacaulk Composite Sheet
    • Metacaulk Composite Sheet
    • Metacaulk Composite Sheet
    • Metacaulk® Composite Sheet is a rigid fire resistive panel used to seal penetrations and restore the fire rating to floor/ceilings or walls in which a large opening has been made for the passage of penetrating items. Technical Data Sheet : English
    • Read more
  • Metacaulk Fire Rated Mortar
    • Metacaulk Fire Rated Mortar
    • Metacaulk Fire Rated Mortar
    • Metacaulk® Fire Rated Mortar is a specially formulated rapid hardening gypsum/cement compound. The product provides the optimum combination of workability, strength and fire resistance. Technical Data Sheet : English
    • Read more
  • Metacaulk Joint Strip
    • Metacaulk Joint Strip
    • Metacaulk Joint Strip
    • A flexible, highly intumescent firestop material used in concrete and masonry control joints up to 1" (25 mm)wide. It forms a strong char that prevents the passage of flame, smoke, and hot gases between control joints. Technical Data Sheet : English
    • Read more
  • Metacaulk BlazeSeal
    • Metacaulk BlazeSeal
    • Metacaulk BlazeSeal
    • Metacaulk® BlazeSeal™ is installed as an integral part of fire door assemblies to provide a positive pressure seal in the clearance area between the door and frame or at the assembly threshold in the event of fire. Technical Data Sheet : English
    • Read more
  • Metacaulk BOX GUARD
    • Metacaulk BOX GUARD
    • Metacaulk BOX GUARD
    • Metacaulk BOX GUARD is a one component fire rated pad for use in electrical box-es. It is inserted on the inside back wall of an electrical box, and is a highly intumescent firestop material. Technical Data Sheet : English
    • Read more
  • Metacaulk COVER GUARD
    • Metacaulk COVER GUARD
    • Metacaulk COVER GUARD
    • Metacaulk® COVER GUARD™ isna single component fire rated gasket for use with electrical boxes when addressing the "24 inch rule". Technical Data Sheet : English
    • Read more
  • Metacaulk Putty
    • Metacaulk Putty
    • Metacaulk Putty
    • Metacaulk® Putty is a mold-able non-curing one compo-nent fire-rated material for through-penetration fire stop systems. Metacaulk Putty will intumesce when heated, form-ing an insulating char. Technical Data Sheet : English
    • Read more
  • Metacaulk Pass-Thru
    • Metacaulk Pass-Thru
    • Metacaulk Pass-Thru
    • Metacaulk® Pass-Thru Devices are pre-firestopped and are designed to allow electrical, data or communica-tion cablesand pipes to penetrate fire-rated floors and walls. They consist of a square or round section steel sleeve which contains intumes-cent material. Technical Data Sheet : English
    • Read more
  • Metacaulk Cast-In-Place
    • Metacaulk Cast-In-Place
    • Metacaulk Cast-In-Place
    • Metacaulk® Cast-In-Place Firestop Devices are designed for use in poured concrete floors to form a through penetration firestop system. Technical Data Sheet : English
    • Read more
  • Metacaulk Wrap Strip
  • Metacaulk Pipe Collars
    • Metacaulk Pipe Collars
    • Metacaulk Pipe Collars
    • Metacaulk® Pipe Collars are prefabricated for open and closed through-penetration firestop systems using 1 1/2"(38 mm) to 6" (152 mm) plastic pipe. Technical Data Sheet : English
    • Read more
  • Metacaulk Industrial Cable Coating
    • Metacaulk Industrial Cable Coating
    • Metacaulk Industrial Cable Coating
    • Metacaulk® Industrial Cable Coating is a heavy duty, acrylic latex based intumescent coating used to prevent flame spread on power and communication cables. Industrial Cable Coating has been especially developed for use in Industrial and Utility applications. Technical Data Sheet : English
    • Read more
  • Metacaulk 1000
    • Metacaulk 1000
    • Metacaulk 1000
    • Metacaulk® 1000 is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Metacaulk® 1000 is water based extremely intumescent, non-sag caulking grade sealant that is easy to apply as well as to retrofit. It cures to an elastomeric seal that is suitable where dynamic movement is expected. Technical Data Sheet : English
    • Read more
  • Metacaulk 835+
    • Metacaulk 835+
    • Metacaulk 835+
    • Metacaulk® 835+ is a one component, fire-rated elastomeric neutral, moisture cure silicone sealant for use in throughpenetration firestops. In the event of a fire, Metacaulk® 835+ will prevent the spread of flames, smoke, gas and water through penetration openings. Technical Data Sheet : English
    • Read more
  • Metacaulk 1200
    • Metacaulk 1200
    • Metacaulk 1200
    • All three grades of Metacaulk® 1200 are a single component, general purpose fire rated sealant for construction joints such as top of the wall, curtain wall perimeter, expansion, control, etc. and for general construction gaps and voids. Metacaulk 1200 is a water based sealant that comes in three different grades. Technical Data Sheet : English
    • Read more
  • Metacaulk MC 150+
    • Metacaulk MC 150+
    • Metacaulk MC 150+
    • Metacaulk® MC 150+ is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Metacaulk® MC 150+ is a water based, non-sag caulking grade sealant that is easy to apply as well as to retrofit. Technical Data Sheet : English
    • Read more